GE Monogram 164D3333P095 - Manual (Page 33)

33
Oven light
bulb
(on some models)
NOTE: The glass cover (on some models) should be
removed only when cold. Wearing latex gloves may
offer a better grip.
Before replacing the bulb, disconnect electrical
power to the oven at the main fuse or circuit
breaker panel. Let the bulb cool completely
before removing it. For your safety, do not
touch a hot bulb with a damp cloth. If you do,
the bulb will break.
To remove:
Turn the glass cover counterclockwise 1/4 turn
until the tabs of the glass cover clears the
grooves of the socket. Remove the bulb.
To replace:
Put in a new 40-watt appliance bulb. Place the
tabs of the glass cover into the groove of the
socket. Turn the glass cover clockwise 1/4 turn.
NOTE:
• A 40-watt appliance bulb is smaller than a
standard 40-watt household bulb.
• Reconnect electrical power to the oven.
• For improved lighting inside the oven, clean
the glass cover frequently using a wet cloth.
This should be done when the oven is
completely cool.
Bulb
Socket
Tab
Glass cover
Maximum
length
3 1 ⁄
2
”
Oven
heating
elements Do not clean the bake element or the broil
element. Any soil will burn off when the
elements are heated.
To clean the oven floor, gently lift the bake
element. Clean with warm soapy water.
(appearance may vary)