GE 25833 - Manual (Page 23)

23
NOTE: If the memory dialing storage is empty, “NO USER MEMORY” shows in the
display.
9. Press the CALLER ID-VOL (or) button to select the desired memory record.
10. Press the MUTE/PROG button to confirm your selection. The display shows VIP
MELODY.
NOTE: If the desired number was previously stored in one of 10 VIP melody
records, “DUPLICATE NUMBER” shows in the display.
11. Press the CALLER ID-VOL (or) button to select the melody. You will hear a sample
of the melody you select.
12. Press MUTE/PROG button to confirm your selection. The selected number and
melody will show in the display for 2 seconds.
Changing a Stored VIP Melody Record
1. Use steps 1 to 12 from section Storing VIP Melody.
2. Then, REPLACE VIP # ? shows in the display, you must press MUTE/PROG button on
the handset to confirm replacement.
NOTE: To change a stored melody in a VIP melody location, you must first delete
it and then re-enter a new melody.
Reviewing and Deleting Stored VIP Melody Record
1. Press the MUTE/PROG button to enter VIP MELODY menu.
2. Use the CALLER ID-VOL (or) button to scroll to the desired VIP melody record.
3. If you want to delete the information, press the DELETE button on the handset while
the entry displays. The display show DELETE VIP # ?
4. Press DELETE again to confirm. You will hear a confirmation tone and VIP# DELETED
shows in the display.
Key Tone
This feature lets you turn off the key tone at night or in a quiet environment.
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (or) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Press the CALLER ID-VOL (or) button to scroll to the KEY TONE menu.
6. Press MUTE/PROG button to enter the menu. SET KEY TONE 1ON 2OFF shows in the
display.