GE 25833 - Manual (Page 36)

36
5. Press the DELETE button to delete the record. DELETED shows in the display.
NOTE: If you don’t want to change or delete a record, simply press the
*EXIT button, or wait for one minute to exit the review mode automatically.
Dialing a Number from Memory
1. Make sure the phone is ON (in talk mode) by pressing the TALK•CALL BACK or
SPEAKER buttons.
2. Press the MEMORY button to display memo # - -.
3. Use the touch tone pad to enter the memory location number (01-50). The number dials
automatically.
-OR-
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50.
3. Press the memory location for the phone number you want to dial, or use the CALLER ID-
VOL ( or ) button to scroll to the number you want to dial.
4. Press the TALK•CALL BACK or SPEAKER buttons. The number dials automatically.
Chain Dialing from Memory
Use this feature to make calls which require a sequence of numbers, such as a calling
card number used for a frequently called long distance number. The following example
shows how you can store each part of the dialing sequence and use chain dialing to make
a call through a long distance service:
The Number For Memory Location
Long Distance Access Number 7
Authorization Code 8
Frequently called long distance number 9
1. Make sure the phone is ON (in talk mode) by pressing the TALK•CALL BACK or
SPEAKER buttons.
2. Press the MEMORY button, and then press 07.
3. When you hear the access tone, press the MEMORY button, and then press 08.
4. At the next access tone, press the MEMORY button and then 09.