Message alert (for answering system), Rings to answer (for answering system) – GE 25833 User Manual

Page 24

Advertising
background image

24

7. Use the touch tone pad on the handset to select 1 or 2, or use the CALLER ID-VOL

(or) button to scroll to your selection. 1ON is the default setting.

8. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the

key tone setting shows in the display.

Message Alert (for answering system)

This feature sets your answering system to give alert tone every 10 seconds when there

are new messages.
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (or) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Press the CALLER ID-VOL (or) button to scroll to the MESSAGE ALERT menu.
6. Press MUTE/PROG button to enter the menu. NEW MSG ALERT 1ON 2OFF shows in

the display.

7. Use the touch-tone pad to enter the selection, or use the CALLER ID-VOL (or)

button to scroll to the 1ON or 2OFF. The default setting is 2OFF.

8. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the

new setting shows in the display.

Rings to Answer (for answering system)

This feature lets you select the number of times you want the phone to ring before the

answering system answers a call.

1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (or) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Press the CALLER ID-VOL (or) button to scroll to the RING TO ANSWER menu.
6. Press MUTE/PROG button to enter the menu. RING TO ANSWER 3 4 5 6 TS shows in the

display.

7. Use the CALLER ID-VOL (or) button to scroll to the your selection. The default

setting is 5.

8. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the

new setting shows in the display.

NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there

are NEW messages, OR the unit answers after the 5th ring if there are NO new

messages. This allows user to access their answerer from another location and then

hang up after 4 rings to save long distance charges.

Advertising