GE 25833 - Manual (Page 30)

30
• To connect to the waiting call, press the FLASH/answerer button on the handset, and
your original call is put on hold.
• To switch between the two calls, press the FLASH/answerer button.
TIP: Don’t press the TALK•CALL BACK button on the handset to activate a custom
calling service, such as call waiting, or you’ll hang up the phone.
Number Redial
You may redial a number up to 32 digits long.
To quickly redial the last number you dialed:
1. Press the TALK•CALL BACK or SPEAKER buttons.
2. Press the REDIAL button.
-OR-
To choose from the last three numbers you dialed:
1. Press the REDIAL button first, then use the CALLER ID-VOL(or) button to select the
desired redial number.
• Press the CALLER ID-VOL () to review the oldest call and scroll toward the most
recent calls (higher numbers).
• Press the CALLER ID-VOL () button to review the newest call and scroll to older calls
(lower numbers).
2. Press the TALK•CALL BACK or SPEAKER buttons. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the REDIAL button to
quickly redial the number.
Exit
Press the *EXIT button to exit a menu function and return to the standby screen.
Page
The page feature helps you locate a misplaced handset. To send and receive pages, all
handsets must be registered. If your handset is not registered, follow the instructions in
the Registration section of this manual.
Handset to Handset Paging
(This is ONLY applicable with addition of Model 25832A optional handset)
If handsets are respectively named as Handset 1 and Handset 2.
1. Make sure the phone is OFF (not in talk mode).
2. Press and release the INT button on a handset. PAGING EXTENSION? shows in the
display.
3. Use the touch-tone pad to enter the handset number you want to page.