De-registration – GE 25833 User Manual
Page 26
26
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (or) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. If necessary, press the CALLER ID-VOL (or) button to scroll to the REGISTRATION
menu. Then, press MUTE/PROG button to enter the menu. REGISTRATION ? 1YES 2NO
shows in the display. The default is 2NO.
6. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CALLER ID-VOL
(or) button to scroll to 1YES or 2NO.
7. If you select 1YES, press the MUTE/PROG button to confirm your selection. HOLD
BASE PAGE WAIT FOR BEEP shows in the display.
8. Press and hold the page button on the base unit until you hear a long tone at the handset.
HANDSET X REGISTERED shows in the handset display, where X is the handset number.
You will hear a confirmation tone.
NOTE: After you have registered one handset, wait 10 seconds before registering
another handset to ensure successful registration.
De-Registration
Deregistration cancels registration. During the de-registration process, keep the handset
near the base.
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (or) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. If necessary, press the CALLER ID-VOL (or) button to scroll to the
DEREGISTRATION menu. Then, press MUTE/PROG button to enter the menu.
DEREGISTRATION? 1YES 2NO shows in the display. The default is 2NO.
6. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CALLER ID-VOL
(or) button to scroll to 1YES or 2NO.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset’s
telephone features cannot be used until the handset is re-registered.
7. Select NO, if you do not want to deregister.
8. If you select 1YES, press the MUTE/PROG button and MOVE NEAR TO BASE displays for 2
seconds, then CONFIRM? 1YES 2NO appears in the display.