Grizzly 12" Cold Cut Saw G0682 - Manual (Page 22)

-20-
g0682 12" Cold Cut saw (mfg. since 12/10)
To set the cutting angle:
1. disCoNNeCt saW From poWer!
2. move the miter lock lever to the left to release
the saw pivot ( figure 24).
3. rotate the saw to the desired angle using the
scale as a guide. When the desired angle is
reached, lock the saw in position by moving
the lever to the right.
4. test the blade clearance by lowering the
saw. if necessary, move the adjustable vise
jaw and the auxiliary stability bracket to pro-
vide adequate clearance, as outlined in
vise
on page 21.
5. return the saw to the upright position.
Cutting Angle
Saw handler: lowers the saw into the
workpiece.
Trigger Switch: turns the motor ON, spinning
the blade and activating the cutting fluid pump.
Miter Lock Lever: releases or locks the rotation
of the saw base for angled cuts.
Work Stop: set at a particular distance from the
blade to produce multiple same-length cuts.
figure 24. miter lock lever.
miter lock lever
Cutting fluid Reservoir: holds cutting fluid and
can be removed for disposal and cleaning.
figure 22. saw controls.
trigger switch saw handle
miter lock
lever Work stop
figure 23. Cutting fluid reservoir.
Cutting Fluid reservoir