MiTAC TYAN S7012 - Manual (Page 43)

43
http://www.tyan.com
3.2.2 IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus>
keys to change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
IDE Configuration
SATA Configuration
Configure SATA as

SATA0 (PM)
 SATA1 (SM)
 SATA2 (PS)
 SATA3 (SS)
 SATA4 (3M)
 SATA5 (4M)
Hard Disk Write Protect
IDE Detect Time Out (Sec)
[Enhanced]
[IDE]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Disabled]
[35]
Options
Disabled
Compatible
Enhanced
←
→ Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
IDE Configuration
Enhanced
Disabled SATA Configuration
Compatible
Configure SATA devices
IDE
RAID Configure SATA as
AHCI
Select legacy IDE, RAID or AHCI as the
SATA interface.
Disabled
Hard Disk Write Protect
Enabled
Enable/Disable device write protection.
This will be effective only if device is
accessed through BIOS.
IDE Detect Time Out
(Sec) 0~35
(at 5 interval)
Select the time out value for detecting
ATA/ATAPI device(s).