MiTAC TYAN S7012 - Manual (Page 61)

61
http://www.tyan.com
Feature Option Description
Configure Remote Access type and parameters
Disabled
Boot Loader
Redirection After BIOS
POST
Always
Disable: Turns off the redirection
after POST
Boot Loader:
Redirection is active during POST
and during Boot Loader.
Always:
Redirection is always active.
<Some OSs may not work if set to
Always>
ANSI
VT100 Terminal Type
VT-UTF8
Select the target terminal type.
Enabled
VT-UTF8 Combo Key
Support
Disabled
Enable VT-UTF8 Combination key
Support for ANSI/VT100 terminals.
No Delay
Delay 1 Sec
Delay 2 Sec
Sredir Memory Display
Delay
Delay 4 Sec
Gives the delay in seconds to
display memory information