MiTAC TYAN S7012 - Manual (Page 66)

66
http://www.tyan.com
3.4 - Boot Menu
You can display Boot Setup option by highlighting it using the Arrow (З/И) keys
and pressing Enter. The settings are described on the following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Boot Settings
 Boot Settings Configuration

Boot Device Priority
 Hard Disk Drives
Configures settings
during System Boot.
←
→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
3.4.1 Boot Settings Configuration Sub-Menu
Use this screen to select options for the Boot Settings Configuration. Use the up
and down arrow (З/И) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Boot Settings Configuration
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
Wait for ‘F1’ if Error
Hit ‘DEL’ Message Display
Interrupt 19 Capture
Endless Boot
[Disabled]
[Disabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
←
→ Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit