MiTAC TYAN S7012 - Manual (Page 62)

62
http://www.tyan.com
3.2.12 Trusted Computing Sub-Menu
You can use this screen to view the Trusted Computing Menu. Use the up and
down arrow (З/И) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option. The settings are described on the following
pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Trusted Computing
TCG/TPM Support
Execute TPM Command
Clearing the TPM
TPM Enable/Disable Status
TPM Owner Status
[No]
[Don’t Change]
[Press Enter]
[Disabled]
[Unowned]
Enable/Disable TPM
TCG (TPM 1.1/1.2)
support in BIOS
←
→ Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
Trusted Computing
No
TCG/TPM Support
Yes
Enable/Disable TPM
TCG (TPM 1.1/1.2) support in
BIOS
NOTE: The items listed below will appear when TCG/TPM Support is set to [Yes].
Don’t Change
Disabled Execute TPM Command
Enabled
Enable (Activate) / Disable
(Deactivate) command to TPM
Clearing the TPM
[Press Enter]
See dialog box
below
Select [OK] to clear the TPM or
[Cancel] to exit.
TPM Enable/Disable
Status
read only
Report TPM Enable/Disable
status
TPM Owner Status read only Report TPM Owner status
Clearing the TPM is the process of returning
the TPM to factory defaults. It is possible
the platform owner will change when in this
state.
Are you sure you want to clear it?
OK Cancel