MiTAC TYAN S7012 - Manual (Page 55)

55
http://www.tyan.com
3.2.8 IPMI 2.0 Configuration Sub-Menu
You can use this screen to view the IPMI 2.0 Configuration Settings. Use the up
and down arrow (З/И) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option. The settings are described on the following
pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
IPMI 2.0 Configuration
Status of BMC
 View BMC System Event Log
Clear BMC System Event Log

Set LAN Configuration
 Set PEF Configuration
BMC Watch Dog Timer Action
BMC Alert LED and Beep
FW Key
Working
[Disabled]
[Off]
[xxxxxxx]
←
→ Select Screen
↑↓ Select Item
+/- Change Option
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
IPMI 2.0 Configuration
Status of BMC Read only Display BMC status
Clear BMC System
Event Log
[Enter] Clear all events in BMC System Event Log.
Disabled
Reset System
Power Down
BMC Watch Dog Timer
Action
Power Cycle
Allows the BMC to reset or power down the
system if the operating system crashes or
hangs.
Off BMC Alert LED and
Beep
On
BMC Alert LED and Beep On/Off
FW Key [xxxxxxx]
Enter IPMI FW key to upgrade IPMI or
iKVM function