Mustek PP3000 - Manual (Page 56)

7 - 6
TM
CHAP. 7
CONTR…
†These control codes are applicable in serial interface only.
Control Codes Hex Codes Function
HT <09> Horizontal tab
LF <0A> Print and line feed
CR <0D> Print and carriage return
ESC SP
• <1B> <20> “n”
Set right side character spacing
ESC !
‚ <1B> <21> “n”
Set printer mode (Font select)
ESC % <1B> <25> “n”
Set/cancel the user-defined
character set
ESC &
ƒ
<1B> <26> “y” “c1”
“c2” [<x> <d1>
…
<d(yxx)>]c2-c1+1
Define user-defined character set
(max. 10 characters)
ESC *
<1B> <2A> “m” “nL”
“nH” [<d>]k
Select bit image mode
ESC 2 <1B> <32> Set 1/6 inch line space
ESC 3 <1B> <33> “n” Set line spacing
ESC @ <1B> <40> Initialize printer
ESC D
<1B> <44> [<n>]k
<00>
Set horizontal tab positions
ESC J <1B> <4A> “n” Print and feed paper
ESC R
„ <1B> <52>
Select an international character
set
ESC U <1B> <55> “n”
Turn uni-directional printing
mode on/off
ESC c 5
<1B> <63> <35> “n” Enable/disable panel button
ESC d <1B> <64> “n” Print and feed n lines
ESC p
<1B> <70> “m” “t1”
“t2” Generate pulse (peripheral
device)
ESC t
… <1B> <74>
Select character code table
ESC { <1B> <7B>
Turn upside-down printing mode
on/off
ESC u
† <1B> <73>
Transmit peripheral device status
ESC v
† <1B> <76>
Transmit paper sensor status
ESC =
† <1B> <3D> “n”
Select peripheral device