Mustek PP3000 - Manual (Page 76)

A - 20
TM
APP. A
STAR …
CODES (HEX/CONTROL) : 1B 68 31 / <ESC> “h” “1”
FUNCTION : Select vertical expanded character mode
APPLICATION LIMIT :
1. When combined with the <SO> code, this code enables printing of the
characters in two times vertical and horizontal size.
2. This code is not combined with the inverted print mode <SI> code.
3. For the 6 x 12 dots IBM block graphic (the characters code table B0H to DFH
and F4H to F5H of IBM character set #1 and #2) of the font construction,
enlargement is only vertical in the upper 8 dots.
4. The relationship of the vertically enlarged character and the normal character
is matched at the lower level.
5. Feed the paper a minimum of one line before printing with this code.
DETAIL DESCRIPTION : This code prints characters two times the
normal vertical size after the code is received. However, the bit image mode
<ESC> “K” and <ESC> “L” are excluded.
CODES
(HEX/CONTROL) : 1B 6C n / <ESC> “l” n
FUNCTION : Set left margin
DEFINITION RANGE : 0
≤ n ≤ (right margin -2)
DETAIL DESCRIPTION : Set the left margin at column n in the current
character pitch. The left margin does not move if the character pitch is changed
later. The left margin must be at least two columns to the left of the right margin
and within the limits above.
CODES (HEX/CONTROL) : 1B 79 n / <ESC> “y” n
FUNCTION : Set n/144 inch line feed
DEFINITION RANGE : 1
≤ n ≤ 255
DETAIL DESCRIPTION :
Line feed is set at n/144 inch after this code
is received, and is effective since first <LF> received after this command.