Mustek PP3000 - Manual (Page 66)

A - 10
TM
APP. A
STAR …
CODES (HEX/CONTROL) : 1B 32 / <ESC> “2”
FUNCTION : Set n/72 inch line feed
DETAIL DESCRIPTION : This code sets the line feed at a defined
value with the last <ESC> “A” previously described or the default value 12, and
is effective since first <LF> received after this command.
CODES (HEX/CONTROL) : 1B 33 n / <ESC> “3” n
FUNCTION : Set n/216 inch line feed simulation
DEFINITION RANGE : 1
≤ n ≤ 255
DETAIL DESCRIPTION :
Line feed is set at n/216 inch after this code
is received, and is effective since first <LF> received after this command.
However, since the actual mechanical precision is 1/144 inch for line spacing,
the actual line feed is accomplished by simulation with integral multiplication of
1/144 inch step.
CODES (HEX/CONTROL) : 1B 34 / <ESC> “4”
FUNCTION : Select highlighted print mode
DETAIL DESCRIPTION : Prints with highlighted characters (white
letter on dark background). If an underline, overline or inverted print command
is input while the highlighted print mode is in effect, the highlighted mode will
be canceled and the newly input command will be executed. If a highlighted
print command is received while the underline, overline or inverted print mode
is in effect, the previously set mode is canceled and the highlighted print mode
will be set.
CODES (HEX/CONTROL) : 1B 35 / <ESC> “5”
FUNCTION :
Cancel highlighted print mode
DETAIL DESCRIPTION : Cancel highlighted print mode.