Mustek PP3000 - Manual (Page 57)

A - 1
TM
APP. A
STAR …
APPENDIX A
STAR COMPATIBLE MODE COMMAND DETAIL
(All commands are listed in hexadecimal code sequence)
CODES (HEX/CONTROL) : 02 / <STX>
FUNCTION : Enter STX-ETX mode
APPLICATION LIMIT :
This code is valid when using serial interface
printer. When IBM character set #2 is selected by character code, the code
<ETX> does not exist (In this instance, select another code).
DETAIL DESCRIPTION : STX-ETX mode is set.
CODES (HEX/CONTROL) : 03 / <ETX>
FUNCTION : Terminate STX-ETX mode
APPLICATION LIMIT : This code is valid when using serial interface
printer. When IBM character set #2 is selected by character code, the code
<ETX> does not exist (In this instance, select another code).
DETAIL DESCRIPTION :
Terminates the STX-ETX mode and prints
out the text data.
CODES (HEX/CONTROL) : 05 / <ENQ>
FUNCTION : Enquiry
APPLICATION LIMIT : This code is valid when using serial interface
printer. When IBM character set #2 is selected by character code, the code
<ENQ> does not exist (In this instance, select another code).
DETAIL DESCRIPTION : Causes printer to transmit status byte (not in
STX-ETX mode). When this code is received after receiving text data in the
STX-ETX mode, the printer transmits the status and check byte.