Technical details – Minolta 2330 User Manual
Page 159
159
TECHNICAL DETAILS
Drive Mode
Mode:
Single shot, sequence shot (approx. 1 frame/sec.), self-
timer shot
The recordable number of images:
Full size
Half size
FINE
Approx. 2 frames
Approx. 6 frames
STD. (Standard)
Approx. 4 frames
Approx. 12 frames
ECON. (Economy) Approx. 8 frames
Approx. 12 frames
Self-timer:
Approx. 10 seconds delayed release
Built-in Flash
Charge time:
Approx. 8 seconds at fill flash
Flash modes:
Autoflash, Fill-flash, Flash cancel, Autoflash with red-eye
reduction, Fill-flash with red-eye reduction (Flash cancel in
the close up mode)
Flash intensity control:
Adjusted automatically by an external light
Interface
Video output:
Composite video signal, switchable between NTSC and
PAL
PC interface:
USB port
Power Supply
Batteries:
AA-sized alkaline battery x 4 or AA-sized Ni-MH battery x
4 (AA-sized lithium battery is not available.)
External power:
AC adapter (supplied) available (a DC terminal is provided
on the camera body.)
Operating temperature:
0 to 40°C (32 to 104°F)
Dimensions and Weight
Dimensions (W x H x D) :
116 x 73 x 62 mm (4.57 x 2.87 x 2.44 inches) (not includ-
ing the projecting parts)
Weight:
Approx. 280g (9.88 oz.) (without batteries and the CF card)
Specifications are based on the latest information available at the time of printing
and are subject to change without notice.