Minolta 2330 - Manual (Page 25)

25
INSERTING THE BATTERIES
Close the battery-chamber door in the
direction of the arrow (1) and slide it
until it clicks (2). 4
* After replacing the batteries, check that the built-in clock (date and time) works correctly
(see page 116).
If neither AC adapter nor batteries are used more than 5 minutes, the built-in clock may
delay or be reset to the default setting. In this case, set the date and time again by
following the procedure described on page 116.
* Do not place the camera with the battery-chamber door facing down when the battery-
chamber door is open. Doing so, the battery-chamber door may be damaged.
* As the batteries become hot right after the camera is operated, be careful when
replacing the batteries.