Minolta 2330 - Manual (Page 26)

26
INSERTING THE BATTERIES
• When nothing is displayed on the data panel,
check that the batteries are installed with a correct
polarity (+/–). When nothing is displayed even
though the batteries are installed correctly, replace
the batteries with new ones.
CHECKING THE BATTERY POWER
When the batteries are installed in the camera, the camera checks the battery
power automatically and shows the result on the data panel.
lights – The battery power is suffi-
cient.
lights — Prepare the new batter-
ies. Even in this status,
the recording or playback
can be performed.
All indicators go out and after that,
blinks for 5 seconds and then, all indicators
go out again.
— Perform the following
either operation. Taking a
picture or playing back
cannot perform.
• Replace all batteries with new ones.
• Remove all batteries and use the AC adapter
(sold separately) (see page 27).