Minolta 2330 - Manual (Page 97)

97
SPECIFYING THE PRINT SETTINGS WITH THE DPOF
0
0
0
0
0
0
QUANTITY
CHANGE IMAGE
ENTER TO SET
After confirming that [STD.] is high-
lighted, press the ENTER button.
• The display to specify the number to be
printed appears on the LCD monitor.
3
Press or key to select the image
to be printed.
• When the image to be printed is selected,
the number to be printed is highlighted.
• When the sixth frame is selected (when the
number to be printed is highlighted) and the
key is pressed, the following 6 frames
are displayed.
• When the seventh frame is selected (when
the number to be printed is highlighted) and
the
key is pressed, the preceding 6
frames are displayed.
4