Master Lock E72 - Manual (Page 13)

IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
Clear Memory Function 16
Level: Grand Master
This function will CLEAR the MEMORY of the lock and/or CLEAR ALL SCHEDULES, DATE AND TIME.
Enter "0" to CLEAR ALL USERS, DATE, TIME, SCHEDULES & FUNCTIONS. (EXCEPT GGM and LOCK ID.)
Enter "1" to CLEAR ALL SCHEDULES, DATE AND TIME.
To fully reset the lock, see page v.
Page 16
Valid User Code
ENTRIES VISUAL / AUDIO
Function Number 6 * 1
VERIFY
Function Number
6 * 1
Note
DATE and TIME are lost when clearing the memory.
ALL other USER, FUNCTIONS and SCHEDULES are RETURNED to factory DEFAULT “0”.
To fully reset the lock, see page v.
ENTER “#” to return to FUNCTION NUMBER (Step 2) and continue programming.
#
See Note
Exit *
Select One:
(0)CLEAR ALL MEMORY
Except GGM & Lock ID
(1)CLEAR ALL
SCHEDULES
DATE & TIME
0 *
1 *
1.
2.
3.
4.
5.
IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
Function 17 Battery Status Check
Page 17
Valid User Code
Level: Security Guard Group
Function DISPLAYS the BATTERY STATUS using the LED DISPLAY on the keypad as shown below. This
makes regular maintenance as easy as possible. Battery status will also be displayed on audit trail.
DO NOT USE LITHIUM BATTERIES.
For more information on batteries, see Battery Information (Page iv).
ENTRIES VISUAL / AUDIO
Function Number
FULL
GOOD
LOW
CHANGE
7 * 1
Note
Lock should be TESTED under NORMAL atmospheric CONDITIONS, as EXTREME HEAT
or COLD will influence battery readings.
For more information on batteries, see Battery Information on page iv.
ENTER “#” to return to FUNCTION NUMBER (Step 2) and continue programming.
#
See Note
Exit *
1.
2.
3.