Master Lock E72 - Manual (Page 7)

Valid User Code
Level: Master
DATE MUST BE SET PRIOR TO ACTIVATING SCHEDULING.
This function SETS the MONTH, DAY, YEAR and DAY OF THE WEEK.
Function Number 3 *
Note
DATE MUST BE SET PRIOR TO ACTIVATING SCHEDULING.
The DEFAULT for this function is MM/DD/YY.
ALTERNATE DATE FORMAT can be used by entering: DD/MM/YY “0” “*”.
ENTER “#” to return to FUNCTION NUMBER (Step 2) and continue programming.
ENTRIES VISUAL / AUDIO
1
#
Month Day Year
Enter Date
*
See Note
Exit *
Set Date / Format Function 13
Page 4
IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
1.
2.
3.
4.
Function Number
Mgmt. Defined (2-4 Digits)
User ID
Function 01 User Maintenance
Page 5
IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
Level: Master
This function creates NEW users or deletes EXISTING users. All USERS are REQUIRED to have a GROUP
NUMBER (See page iii). GGM Code sets standard length format for all USER CODES. (See page iii.)
Mgmt. Defined
PIN
See Note
Exit
*
Mgmt. Defined 02-99 (2 Digits)
ENTRIES VISUAL / AUDIO
#
1 *
*
*
Valid User Code
Group Level
Note
To DELETE user, enter “0 ” in place of GROUP then EXIT “*”.
GGM CODE sets standard length for all USER CODES. (See page iii.)
ENTER “#” to return to FUNCTION NUMBER (Step 2) and continue programming.
0
*
1.
2.
3.
4.
5.
6.