Master Lock E72 - Manual (Page 18)

Upload Lock Information Function 14
Page 26
IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
Valid User Code
Level: Security Guard
This function will take the information stored in the IDT and upload and update the E72’s memory. Any
changes made at the door via the keypad and not updated in the computer will be lost once the update is
complete. For further instruction on the uses of the IDT or software, refer to the IDT instruction manual.
Wait For Upload See Hand
to be Completed Held Device
ENTRIES VISUAL / AUDIO
Function Number 4 * 1
Note
ALL existing SCHEDULE INFORMATION not updated in the computer will be lost upon upload.
#
See Note
Exit *
1.
2.
3.
4.
Function 15 Download Audit Trail
Page 27
IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
Valid User Code
Level: Security Guard
Function will DOWNLOAD the E72 audit trail to the IDT. The number of events downloaded are user defined
but limited to your upgrade option. For the standard E72, the maximum number of downloadable events are
64.
After a download, the IDT display will show: battery status, lock ID and serial number.
For the maximum number of downloadable events, see the chart on page 30.
Enter Number of Events
to be Downloaded
ENTRIES VISUAL / AUDIO
Function Number 5 * 1
*
#
See Note
Exit *
Note
Consult page 30 for maximum number of downloadable events.
1.
2.
3.
4.