Motorola SABER RVN4002K - Manual (Page 50)

VIII. CHANGE/CREATE/VIEW RADIO PERSONALITY
This chapter will take you through the screen sequences necessary to change, create, or view a
radio personality file. The SABER radio, with its numerous codeplug parameters and options,
offers tremendous flexibility to customize the radio configuration to almost any customer
requirement. After selecting this function (F4), the screen in Figure 18 will be shown. In general,
this function can create a radio personality by selecting a model number and radio frequency
range, or modify an existing RPF. The following sections provides a detailed explanation of each
function key.
Figure 18. Change/Create/View Codeplug Menu
Warning: The Change/Create/View does NOT actually modify the radio codeplug data but
instead it modifies a copy of the data retrieved from the codeplug (or archive file)
via the Read/Write Radio (F3) or the Load/Save Disk (F6) functions.
After all Change/Create/View modifications are completed, you MUST return to the
Read/Write Radio (F3) or the Load/Save Disk (F6) functions in the MAIN menu
and save them to a new archive file. Otherwise, the modifications will be lost
when you turn off your computer, exit the program, or load in another codeplug.
F1 - Help for Create and Modify
F2 - View Radio Information
F3 - CREATE Radio Personality File
F4 - Radio Feature Options
F5 - Channel Information
F6 - Auto Dial / Access and Hangup Codes
F7 -
F8 - Format Scan Lists
F9 - Format Selectable PL
F10 - EXIT
MOTOROLA Radio Service Software
SABER Model:
Ver. R07.00.00 Select Function Key F1 - F10
F1
HELP
F2
VIEW
RADIO INFO
F3
CREATE
RPF
F4
RADIO
OPT
F5
CHAN
INFO
F6
AUTO
ACC/HNG
F7 F8
SCAN
LIST
F9
SELECT
PL
F10
EXIT
CREATE / MODIFY / VIEW CODEPLUG
Main.Create/Modify.
44 Change/Create/View Radio Personality
R07.01.00