Motorola SABER RVN4002K User Manual
Page 65
The list of all possible data displayed on the channel information includes:
T
=
Time Out Timer
M
=
MDC ID Enabled
R
=
Emergency Revert Channel
C
=
Channel Strapped CLEAR
S
=
Channel Strapped CODED
X
=
Secure Range Extension Enabled
n
=
Assigned Scan List (if any) ( 2 Characters long )
Q
=
Quik-Call II
F
=
Flat Audio Enabled
D
=
MDC Decode ENABLED
P
=
Emergency PTT
O
=
DOS MUTING
I
=
Transmit INHIBIT on BUSY CHANNEL
1-8 :
Repeater Index
1/2/M :
RAT1
1/2/M :
RAT2
1/2/M :
PTT
If a given attribute is not assigned or disabled, then a period "." is printed in its place. By
moving the cursor to the specified zone/channel and pressing F4 or ZOOM, the complete
channel information screen on that channel will be displayed.
F5
Print - This print function allows you to print out all the channel DC ID Table - This
function key displays the Repeater Access Codes (MDC) if any of the Multiple Repeater
Access Codes options were chosen.
F7
Copy Freq - This function key will copy the frequency entered from TX FREQ to RX
FREQ and vice versa.
F8
Copy PL - This function key will copy the PL entered from TX PL to RX PL and
vice versa.
Change/Create/View Radio Personality
59