Miele G 803 - Manual (Page 14)

14
Procedure... lights flashes
^ Open the door.
^ Turn off the dishwasher using the “Off” (o) button.
^ Hold the buttons
b
and
d
in and at the same time
turn the dishwasher on with the “On” (
g) button.
On Salt
^ Release the buttons
b
and
d
. On Salt +
c
Note: If any other indicators flash the process must
be repeated.
The following indicators will light, if:
– rinse aid was never added or needs to be refilled, Rinse aid
– Heated drying is deactivated (see “Additional fea-
tures“),
b
– the water intake time has been increased (see “In-
creasing water intake time”),
d
– the end of program buzzer is deactivated
(see “Additional features”).
e
^ Press the
c
button. On Salt
As the water hardness is programmed an additional
indicator will also light.
1 - 5 gr/gal ( 20 - 90 ppm):
6 - 7 gr/gal (110 - 130 ppm):
8 gr/gal (140 ppm):
9 - 11 gr/gal (160 - 200 ppm):
12 - 14 gr/gal (220 - 250 ppm):
If the water hardness is programmed between
15 gr/gal and 70 gr/gal (270 -1260 ppm) an additional
indicator will also light.
b
c
d
e
f
Before using for the first time