Miele G 803 - Manual (Page 36)

End of program buzzer
A buzzer sounds to indicate the end of a program. The buzzer is activated at the
factory. This buzzer can be turned off so that it does not sound.
Activating and Deactivating the End of program buzzer
Procedure... lights flashes
^ Open the door.
^ Turn off the dishwasher with the “Off” (o) button.
^ Press buttons
b
and
d
simultaneously and at the
same time turn the dishwasher on with the “On” (
g)
button.
On Salt
^ Release buttons
b
and
d
again. On Salt +
c
Note: If any other indicator light is flashing ,
the process must be repeated.
The following indicator lights may also light , if:
– rinse aid was never added or needs to be refilled, Rinse aid
– Heated drying has been deactivated,
b
– the water intake time has been increased
(see “Increase water intake time”),
d
– End of program buzzer is deactivated.
e
Operating the dishwasher
36