Miele G 803 - Manual (Page 33)

The dishwasher can now be unloaded
(see “Unloading the dishwasher”).
Be careful not to touch the heating
elements. They can become ex-
tremely hot and cause serious
burns!
The water valve should be closed if the
dishwasher will not be used for a long
period of time, (e.g. while on vacation).
Changing a program
If the door has not been closed after
selecting a program:
^ Simply press the button for the new
program.
^ Close the door.
The program will start.
If the program has already started and
you wish to change the program:
^ Open the door.
^ Press the “Off” button (16).
^ Press the “On” button (15).
^ Press the selected program button.
^ Close the door.
The program will start.
Interrupting a program
A program is interrupted as soon as the
door is opened.
When the door is closed, the program
will continue from the point it was at be-
fore the door was opened.
Warning!
Water in the dishwasher may be
hot. There is a danger of being
burned! Only open the door if ab-
solutely necessary and with ex-
treme caution. Before closing the
door, leave ajar 20 seconds. This
will allow the temperature in the
wash cabinet to settle. Close the
door firmly until it clicks into
place
Be careful not to touch the heating
elements. They can become ex-
tremely hot and cause burns!
Operating the dishwasher
33