Mark Levinson N32 - Manual (Page 17)

1-9
Nº32 Reference Preamplifier Getting Started
Quick Setup and Listen
These instructions are intended to accommodate immediate use of
the Nº32. However, it is important to read this owner’s manual
before attempting more extensive use. This owner’s manual
includes information about features that enhance operation and
performance, as well as important safety, installation, and opera-
tion instructions designed to prevent personal injuries and product
damage.
Caution!
Never make or break connections to the Nº32 unless it and all
associated components are powered off and disconnected from
electrical outlets.
To begin using the Nº32:
1. Make sure the Nº32 and all associated components are powered
off and disconnected from electrical outlets.
2. Using one of the supplied DC power cables, connect the Con-
troller left-channel DC power connector to the preamplifier
left-channel DC power connector.
3. Using the other DC power cable, connect the Controller right-
channel DC power connector to the preamplifier right-channel
DC power connector.
Note
The Nº32 offers balanced (XLR) and unbalanced (RCA) connectors. For
best performance, use balanced connections whenever possible.
4. Connect the desired Nº32 input connectors to the source com-
ponent (for example, a CD player) output connectors.
• Use the Nº32 balanced input connectors numbered 1, 2, or
3 if the source component offers balanced output connec-
tors.
• Use the Nº32 unbalanced input connectors numbered 4, 5,
6, 7, or 8 if the source component does not offer balanced
output connectors.
5. Connect the desired Nº32 main output connectors to the asso-
ciated power amplifier input connectors.
• Use the Nº32 balanced main output connectors if the asso-
ciated power amplifier offers balanced input connectors.
• Use the Nº32 unbalanced main output connectors if the
associated power amplifier does not offer balanced input
connectors.