Mark Levinson N32 User Manual

Page 67

Advertising
background image

5-3

Nº32 Reference Preamplifier

Troubleshooting & Maintaining

No Link Controls

1. Make sure the slave chain includes Mark Levinson digital audio

processors and digital transports that are compatible with the
Nº32.

2. Make sure Link connections have been made using Link com-

munication ports and Link cables.

3. Examine Link connections to ensure a solid connection

between linked components. Constructed Link cables must be
twisted 180° for a straight-through (pin 1-to-pin 1) connection.

4. Examine the slave chain to ensure that linked components are

connected in the proper sequence.

5. Make sure Link controls have been enabled on the linked digital

transport(s) linking menu, which allows activation and deacti-
vation of individual Link controls. Refer to the appropriate digi-
tal transport owner’s manual for additional information.

6. Make sure linked components have been powered on in the

proper order – digital transport(s), then digital audio processor,
then Nº32, then power amplifier(s). Linked components must
be powered on ONE AT A TIME in this order to ensure proper
functioning of Link controls.

Audible Hum

1. If a cable TV connection is present, disconnect the cable from

the electrical outlet. If this eliminates the humming sound, a
ground loop isolation device is required. Contact an authorized
Mark Levinson dealer for assistance.

2. Disconnect components one at a time to isolate the problem.

Once the problem is identified, make sure the problematic com-
ponent is properly grounded and connected to the same electri-
cal circuit as the Nº32.

Erratic Behavior

1. Power cycle the Nº32, waiting at least 10 seconds between pow-

ering the Nº32 off and on.

2. Restore factory-default settings (See “Restoring Factory-default

Settings” on page 5-4).

If All Else Fails...

1. Power cycle the Nº32, waiting at least 10 seconds between pow-

ering the Nº32 off and on.

2. Restore factory-default settings (See “Restoring Factory-default

Settings” on page 5-4).

3. Contact an authorized Mark Levinson dealer.

4. Contact Mark Levinson Customer Service at 781-280-0300 or

www.marklevinson.com.

Advertising