Mark Levinson N32 - Manual (Page 54)

4-10
Controls and Modes Mark Levinson
2. Press the front panel record out button to activate record
mode.
The record out LED lights when record mode is activated.
3. Rotate the select knob or press the select / buttons to select
the source input (the input assigned to the Nº32 input connec-
tors selected in step 4 of “Making EQ Mode Connections” on
page 4-7).
The front panel display indicates the name and volume level of
the selected input.
4. Press the record out button to deactivate record mode.
5. Rotate the select knob or press the select / buttons to select
the EQ input.
6. Play the source input.
• The source input is routed through the EQ input using the
record output connectors, allowing the source input to pass
through a dedicated equalizer.
• The volume control now controls the output of the source
and EQ signal.
• The source input is monitored on the record output signal
path.
• The Gain and Offset parameters are NOT available for the
EQ input. However, the record output connectors pass the
source input at variable levels. The volume knob and
volume ± buttons can be used to adjust master volume
level.
SSP (Surround Sound Processor)
Mode
The SSP mode configures the selected input for complete integra-
tion with a multi-channel surround sound processor.
In the past, the difference between the number of channels in
each component made integration difficult.
Sending multi-channel processor output signals to a stereo
preamplifier distorts calibrated processor output levels. Multi-
channel processor volume controls adjust the relative volume
level of all channels in unison. But, stereo preamplifier volume
controls adjust the relative volume level of just the front left