Mark Levinson N32 - Manual (Page 41)

3-9
Nº32 Reference Preamplifier Setup Menu
Table 3-2: IR Command List.
Custom
Name Description
VOLUME UP Executes volume + button commands.
VOLUME DOWN Executes volume – button commands.
SELECT NEXT Executes select  button commands.
SELECT PREV Executes select  button commands.
INTENSITY Executes display intensity/display button commands.
MUTE KEY Executes mute button commands.
MONO KEY Executes mono button commands.
POLARITY KEY Executes polarity button commands.
STANDBY KEY Executes standby button commands.
ENTER KEY Executes enter button commands.
SETUP KEY Executes setup button commands.
BALANCE KEY Executes balance button commands.
RECORD KEY Executes record out button commands.
EXIT STANDBY Takes the Nº32 out of standby.
GO STANDBY Places the Nº32 into standby.
GO INPUT 1-8 Selects the corresponding input.
GO PHONO 1 Selects (the optional) phono module 1.
GO PHONO 2 Selects (the optional) phono module 2.
GO MUTE Attenuates master volume by the selected mute
level.
GO UNMUTE Restores master volume to its original level.
GO MONITOR Deactivates record mode.
GO RECORD Activates record mode.
GO BALANCE Opens the balance control.
EXIT BALANCE Closes the balance control.
DISPLAY OFF Sets display intensity to 0%, deactivating the front
panel display.
DISPLAY DIM Sets display intensity to 25%.
DISPLAY HALF Sets display intensity to 50%.
DISPLAY FULL Sets display intensity to 100% (full brightness).