Micro Innovations M000174-19 - Manual (Page 19)

Windows CE Printing
M000174-19 19
3.2 P ARALLEL INTERFACE
Some MICRO PANEL devices are provided with a parallel printer interface which can be used for
connecting the printer.
Note:
Only printers that support the PCL protocol can currently be connected. PCL is a language developed
by HP
® which, however, is also supported by other printer manufacturers.
3.3 S ERIAL INTERFACE
The serial port can also be used for connecting the printer. Two different modes are always available
for printing via the serial port.
Printing using Windows driver
Connecting a printer to the serial interface in conjunction with a standard Windows CE driver has the
same requirements as for the parallel interface.
Note:
Only printers that support the PCL protocol can currently be connected. PCL is a language developed
by HP
® which, however, is also supported by other printer manufacturers.
Printing using ESC sequences
The GALILEO Runtime program also supports printing by means of ESC sequences. This makes it
possible to connect a printer without the need for a Windows CE driver. However, the project designer
must create a «kind» of printer driver (PRV file) in which the necessary commands are defined with
ESC sequences. Further information is provided in the GALILEO documentation.