Micro Innovations M000174-19 - Manual (Page 22)

System settings Windows CE
22 M000174-19
4.3 D ATE / T IME AND T IME Z ONE S ETTING (D ATE T IME )
4.3.1 D ATE /T IME
You can change the month and year using the two buttons stated (<< and >>). You can select the day
directly by touching the day of the month. Hours, minutes and seconds are changed after they are
selected with the buttons shown above. Hours must be entered in 24 hour format. Touching «OK» will
cause the current settings in the clock module to be saved and retained, even in the event of a restart.
Note:
The daylight saving time change is NOT automatic. The year number cannot be set to a lower value
than the current year.
4.3.2 T IME ZONE
The dialog shown can also be used to set the required time zone. The «GMT» time zone is set by
default, i.e. without a time shift setting. The set time zone is also retained after a restart.
Month/Year
Day
Hours Minutes Seconds