Micro Innovations M000174-19 - Manual (Page 77)

Windows CE Licensing
M000174-19 77
9 L
ICENSING
The MICRO PANEL devices are provided with an integrated licensing system. A certain number of
licensing points are required depending on the functions used. Devices already come on delivery with
a standard number of license points depending on type. The actual number of license points is shown
during the startup and inside the system information display (see chapter
Startup behavior , System
properties and License Administrator ).
Important:
Licensing is only required for additional/optional functions! The relicensing must be carried out
specifically for each individual device. The license code provided by the distributor can only be used
on the MICRO PANEL with the corresponding serial number!
9.1 R ELICENSING P ROCEDURE
With a license product certificate:
Fill in the license product certificate completely. For all further information refer to the License Product
Certificate. Afterwards a license code will be sent to you immediately in accordance with your order
(by email). A description of the licensing procedure is also sent with the code. One possibility is
described in the chapter:
License Administrator .
Without a license product certificate:
Contact your MICRO PANEL distributor. The following information is required to order your license
points:
• Specification of the required functions
• Serial numbers of all MICRO PANEL you wish to relicense.
Note:
The serial number is printed on the device nameplate and is displayed inside the
System Properties or
License Administrator .