Micro Innovations M000174-19 - Manual (Page 24)

System settings Windows CE
24 M000174-19
4.4.3 O RIENTATION
Display orientation can be set with the «0» (default setting)
or «90» settings. The display is rotated in a clockwise
direction. The «90» setting should be selected for vertical
mounting. The picture on the left of the dialog shows the
orientation set. The setting is not transferred until after a
restart.
Note:
This function is not supported by all MICRO PANEL
devices.
4.4.4 C OLORS
This setting enables the number of screen colors to be
selected. Different color depths can be selected. The
setting is not transferred until after a restart.
Note:
This function is not supported by all MICRO PANEL
devices. If this function is not available, the device
operates with 256 colors.
4.4.5 B OOT O PTION ( STARTUP WITH HIDDEN OS SHELL )
This setting can be used to modify the startup behavior of
the device. If this option is enabled, either the
Autoexec.bmp bitmap or a black screen will be displayed
during startup instead of the Windows CE interface. The
execution of the
Autoexec.bat file is also not visible.
This setting can also be set via the Command line
parameter «shell hide» or «shell show».
The Autoexec.bmp bitmap file must be stored in the root directory of the memory card «\StorageCard».
The device returns to normal display if either a program (e.g. HMI Runtime GRS) «switches» the
display or after around 14 seconds have elapsed. The default delay time of 14 seconds can be
overwritten using the following registry entry (enter the number of seconds in HEX, max. 60 seconds):
[HKEY_LOCAL_MACHINE\Init]
"StartupDisplayDelay"=dword:0014 ;e.g. 20 seconds
Note:
This function is not active if the
CTRL/DOWNLOAD button is pressed during the startup!
4.4.6 C OMMAND LINE PARAMETERS
The Command line call is described in chapter 4.1. All parameters can be used as required, although
only the settings of the used parameters can be changed. The following parameters are supported: