Minolta PCL6 - Manual (Page 25)

2. Windows NT 4.0/2000/XP
2-11
In
st
a
llin
g
th
e P
rin
ter Dr
iver
Chap
ter
2
4. A dialog box that allows you to select the type of connection for the printer will
appear. Select “Local printer attached to this computer”.
* For Windows NT 4.0, select “My Computer”.
For Windows 2000, select “Local printer”.
NOTES
• The printer is actually connected to the network. However, since other network
settings are required, the printer driver is temporarily installed as for a local
connection.
• To make settings for using the network, it is recommended that your read the
Pi8500Pro Getting Started manual, which comes with the controller.
5. Click the [Next>] button.
6. A dialog box that prompts you to select the port will appear. Select a port, and
then click the [Next>] button.
NOTES
• The selected port will be changed later.
C4027P202CA
C4027P203CA