Minolta PCL6 - Manual (Page 80)

A
p
p
end
ix
3. E.C.M. (E.K.C.)
A-14
[2] E.C.M. all count reset
Use this function to reset the count for all E.C.M. counters.
Procedure
1. Touch [4] E.C.M. function setting on the Key operator mode menu screen. Enter
an 8-digit E.C.M. master key code, and then touch [OK] to display the E.C.M.
setting menu screen.
NOTE:
If an invalid E.C.M. master key code is entered, continue by entering the valid
8-digit code.
2. Touch [2] E.C.M. all count reset. The Reset all E.C.M. counters screen will be
displayed.
3. Touch [YES] to reset all counters to zero and to return to the E.C.M. setting
menu screen.
Or touch [NO] to cancel. Touching [PREVIOUS SCREEN] will also cancel this
function and return to the E.C.M. setting menu screen.
4. If other E.C.M. setting changes are required, touch the desired key from [1] to
[3].
5. Touch [PREVIOUS SCREEN] to restore the Key operator mode menu screen.
6. If no further changes are required, touch [PREVIOUS SCREEN] to restore the
basic screen for performing copy operations.
ECM Setting Menu Screen ECM All Count Reset Screen
C4027P221CA C4027P231CA