Minolta PCL6 - Manual (Page 39)

4. Setup tab
3-7
P
rop
er
ti
es
Se
tt
in
gs
Ch
apte
r 3
NOTES
• If the original document for a print job contains pages of different sizes and/or
different orientations, pages may be partially cut or overlap each other.
• This setting is not available if Custom Paper is used.
TIP
The print layout is displayed in the Page Layout area.
(2) Duplex / Booklet
Specifies two-sided printing and booklet printing.
• Off
No setting
• Short Edge Binding Two-sided printing that allows for the short edge to
be bound
• Long Edge Binding Two-sided printing that allows for the long edge to
be bound
• Booklet Left Binding Four pages are printed on both sides of a single
sheet of paper so that when the sheet is folded in the
middle it forms a left-bound booklet.
• Booklet Right Binding Four pages are printed on both sides of a single
sheet of paper so that when the sheet is folded in the
middle it forms a right-bound booklet.
☞ See p. 1-3 for an illustration.
NOTES
• If the original document for a print job contains pages of different sizes and/or
different orientations, pages may be partially cut or overlap each other.
• Two-sided printing and OHP Interleaving are not available simultaneously.
TIPS
• Two-sided printing can be performed on paper of the following sizes: Letter,
Letter-R, Legal, A3, A4, A4-R, A5, B4, B5, B5-R, Invoice, 11
×
17, F4-1, F4-2,
F4-3, and F4-4.
• Short Edge Binding, Long Edge Biding, Booklet Left Binding and Booklet
Right Binding will be displayed in the Page Layout area.