Minolta PCL6 - Manual (Page 77)

3. E.C.M. (E.K.C.)
A-11
A
p
p
end
ix
Procedure
1. Touch [4] E.C.M. function setting on the Key operator mode screen. Enter an 8-
digit E.C.M. master key code, and then touch [OK] to display the E.C.M. setting
menu screen.
NOTE:
If an invalid E.C.M. master key code is entered, continue by entering the valid
8-digit code.
2. Touch [1] E.C.M. data edit. The E.C.M. data Edit screen will be displayed.
3. To change, add, or delete the E.C.M. data, and to reset the copy count of an
account, follow the procedure described below for each account.
To change E.C.M. data:
(1) Touch the arrow keys on the right side of the list to highlight the E.C.M. data to
be changed, and then touch [Change]. The E.C.M. data Change screen will be
displayed.
(2) Touch the desired item key to highlight it, and then enter new data by using the
touch screen keypad.
Password
Max. 8 digits (See note 1.)
Name Max. 8 characters (See note 2.)
Limit Max. 999,999 copies
NOTES:
1 We recommend that you make a list of all E.C.M. passwords and account
numbers.
2 If an invalid user name is entered, continue by entering the valid name.
(3) Touch [OK] to complete the setting and to verify whether the same password or
name has already been used for another account number.
When a password is duplicated:
The duplicate password screen will be displayed. Touch [YES] to enter a new
password or [NO] to create a duplicate password.
NOTE:
If a duplicate password is created, the number of copies will be counted only
for the E.C.M. password with the smallest number. We recommend you do not
use duplicate E.C.M. passwords.
When a name is duplicated:
The duplicate name screen will be displayed. Touch [OK] to re-enter new
name.