Minolta PCL6 - Manual (Page 47)

5. Paper tab
3-15
P
rop
er
ti
es
Se
tt
in
gs
Ch
apte
r 3
(2) Output Paper Size
Allows you to set the size of the paper on which prints are to be made.
• Output Paper Size
Allows you to specify the size of the printing paper.
• Paper size Select the size of the printing paper.
Available settings: Letter, Letter-R, Legal, A3, A4,
A4-R, A5, A5-R, A6, B4, B5, B5-
R, Invoice, Invoice-R, 11
×
17, F4-
1, F4-2, F4-3, F4-4
• Fit to Paper The original is printed at a zoom ratio that matches
the size of the printing paper.
• Scaling Specify the print zoom ratio.
Setting range:
25 to 400%
☞ See p. 1-3 for an illustration.
NOTES
• If you select a paper size not loaded in the machine, the machine will display a
message informing you of this.
• If you specify a paper source and paper size that do not match the specified
tray, the machine will display messages showing that the specified paper size is
not correct and asking if printing should be executed forcibly.
• If the Original Document Size setting does not match the size specified in the
application with “Fit to Paper” selected, the machine will use the paper size
set in the application.
(3) Full Bleed
Specify if you want to print the pages with a full bleed.
• Off
The document is not printed with a full bleed.
• On The document is printed with a full bleed.
(4) Wide Paper
Specify if you want to use wide paper.
• Off
Wide paper is not used.
• On Select the size of wide paper used.