Minolta PCL6 - Manual (Page 75)

3. E.C.M. (E.K.C.)
A-9
A
p
p
end
ix
How to access the ECM setting mode
Procedure
1. Touch “[4] E.C.M. function setting” on the Key operator mode menu screen.
The Enter E.C.M. master code screen is displayed if a code is required.
2. Use the keypad on the touch screen to enter your 8-digit E.C.M. master key
code, and then touch [OK] to display the E.C.M. setting menu screen. (See
note.)
3. Select the desired E.C.M. function, and then make settings as required.
4. To exit the E.C.M. mode, touch [PREVIOUS SCREEN] on the E.C.M. setting
menu screen, and then touch [PREVIOUS SCREEN] on the Key operator mode
menu screen to restore the basic screen.
NOTE
If an invalid E.C.M. master key code is entered, continue by entering the valid 8-
digit code. The E.C.M. master key code can be set to less than 8 digits with the
Memory switch setting of the Key Operator function.
C4027P219CA C4027P220CA
C4027P221CA
Key Operator Mode Screen ECM Master Key Code Screen
ECM Setting Menu Screen