Marantz MV8300_U1B - Manual (Page 13)

EN
13
Tuner Setting Setting channels automatically
— Auto Channel Set
Use Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting. If you want to add
or delete channels, use Manual Channel Set (
੬ pg. 14).
1 Access Main Menu screen
Press MENU.
2 Access Tuner Set Up screen
1 Press @ # to move
the arrow to
“TUNER SET UP”,
then press
fi or
OK.
2 Press @ # to move
the arrow to
“TUNER SET”,
then press
fi or OK.
3 Perform Auto Channel Set
You can automatically
set the receivable
channels in your area
in the order of their
frequencies.
Press
%fi to move the
arrow to “AUTO CH
SET”, then press OK.
NOTES:
● When Auto Channel
Set is complete,
“SCAN COMPLETED”
appears on screen.
● If the scan was
unsuccessful, “SCAN
COMPLETED – NO SIGNAL FOUND –” appears on
screen. Check the connections, then select “RETRY”
to start again, or select “EXIT”.
4 Return to normal screen
Press MENU.
INFORMATION
The VCR selects the correct band (TV or CATV)
automatically during Auto Channel Set.
The selected band will be displayed on the right side of
“BAND” on the Tuner Set Up screen.
FUNCTION SET UP INITIAL SET UP TUNER SET UP
THEN PRESS [OK]
BAND
AUTO CH SET
MANUAL CH SET
TV
DBS SET UP
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
TUNER SET CABLE SET UP
VCR
TV
CABLE
/DBS
1 4
2 3 FUNCTION SET UP INITIAL SET UP TUNER SET UP
THEN PRESS [OK]
AUTO CHANNEL SET
SCANNING...
PRESS [MENU] TO END
DBS SET UP
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
TUNER SET CABLE SET UP
FUNCTION SET UP INITIAL SET UP TUNER SET UP
THEN PRESS [OK]
TUNER SET
BAND
AUTO CH SET
MANUAL CH SET
TV
CABLE SET UP DBS SET UP
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the VCR/TV/CABLE/DBS selector on the
Remote to “VCR”.
HM-DH40000U-EN10-14 1/22/3, 4:36 PM 13