Marantz MV8300_U1B - Manual (Page 30)

30
EN
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab
Other useful functions for recording
You can also use the following functions for recording.
● Video Calibration (S-VHS/VHS only) (੬ pg. 54)
When this function is set to “ON”, this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
● Second Audio Recording (੬ pg. 55)
This VCR’s built-in MTS decoder enables reception of
Multichannel TV Sound broadcast.
To record a SAP program received, set “2ND AUDIO REC”
to “ON” using the menu screen.
NOTES:
When the channel is changed on the VCR;
● The “STEREO” indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
● The “SAP” indication appears on the screen for about 5
seconds if the program is a SAP broadcast.
● The “SAP STEREO” indication appears when a stereo
program is accompanied by SAP sound.
● S-VHS Recording Mode (੬ pg. 58)
This VCR allows you to record on a D-VHS and S-VHS
tape with VHS picture quality.
● S-VHS ET ( ੬
pg. 59)
This function allows you to record on VHS tapes with
S-VHS picture quality. Tapes recorded using this function
can be played back on a VCR equipped with the S-VHS ET
BASIC PLAYBACK AND RECORDING (cont.)
function.
HM-DH40000U-EN21-33 1/22/3, 4:38 PM 30