Initial settings (cont.), Enter dbs receiver’s brand, Engage test mode – Marantz MV8300_U1B User Manual

Page 20: Return to normal screen

Advertising
background image

20

EN

5

Enter DBS Receiver’s brand

Press

%fi to move

the arrow to
“BRAND”.
Press

@ # to enter the

brand code from the
following list.

6

Engage test mode

Press

%fi to move the arrow to “TEST MODE”,

then press OK.
The program currently received through the DBS
receiver appears for about 10 seconds.

NOTE:

If you do not engage the test mode in step

6

, “INPUT

CH” and “BRAND” are not set.

If the DBS receiver’s channel changes to 205,

setting is complete
Press

@ # to move

the arrow to “YES”,
then press OK and
“DBS RECEIVER
CONTROL IS ON”
appears on the
screen for about 5
seconds.

If the DBS receiver’s channel does not change

as shown above
1 Press

@ # to move the arrow to “NO”.

2 Press OK.
3 Re-enter the correct code.

7

Return to normal screen

Press MENU.

INITIAL SETTINGS (cont.)

VCR

TV

CABLE

/DBS

5 6

7

NOTES:

The Controller may not work with all types of DBS receiver.

If your DBS receiver does not respond to the code, you
cannot use the Controller to change satellite channels. In this
case, make sure to leave the DBS receiver turned on and
tuned to the proper channel before the scheduled start time of
timer recording. In addition, if your DBS receiver is equipped
with a timer, you can also use “Satellite Auto Recording”
(

pg. 62).

The VCR can only change the satellite channel through the
Controller during timer recording.

If your DBS receiver cannot be operated with a Remote
(because it has no remote sensor), you cannot use the
Controller to change its channels. Make sure to leave the DBS
receiver turned on and tuned to the proper channel before the
scheduled start time of timer recording.

For customers in U.S.A.: If you are unable to set the
Controller, contact JVC toll free at 1-800-252-5722.

FUNCTION SET UP

INITIAL SET UP

TUNER SET UP

THEN PRESS [OK]

INPUT CH

BRAND

TEST MODE

OFF

40

SELECT WITH ARROW KEYS

SELECT

OK

EXIT

MENU

DBS SET UP

FUNCTION SET UP

INITIAL SET UP

TUNER SET UP

THEN PRESS [OK]

YES

NO

DID YOUR DBS RECEIVER CHANGE TO

CHANNEL 205?

SELECT WITH ARROW KEYS

SELECT

OK

EXIT

MENU

DBS SET UP

INPUT CH

OFF

BRAND

CODE

JVC (DISH Network)

51

ECHOSTAR (DISH Network)

51

SONY (DSS)

41

RCA (DSS)

40

HM-DH40000U-EN15-20

2/7/3, 4:28 PM

20

Advertising