Configuring wireless network settings, Wireless ˚ basic – Motorola WR850G User Manual
Page 43
CONFIGURATION
SECTION 3
SECTION 3, CONFIGURATION
3-9
Field or Button
Description
DNS Lookup
An Internet utility that discovers the IP address of
a website name. For example, if you enter
server returns the IP
address of Yahoo.
All three utilities are initiated using the same method. Use the
following procedure for each:
1 Enter the Host Name or IP Address for which you require
information.
2 Click the Ping, Trace Route, or DNS Lookup button to activate
the utility. The results of your query are displayed.
Configuring Wireless Network Settings
The Wireless Network screens enable you to adjust settings for your
wireless connection. Refer to each subsection for further
descriptions. These include:
! Basic
! Security
! Site Monitor
! Advanced
Wireless - Basic
This screen enables you to setup your Service Set Identifier (SSID)
parameters for your network. The SSID is the name of your network
that is shared among all the devices in a wireless network. The SSID
must be identical on all of the devices in your wireless network. The
SSID is case-sensitive and must not exceed 32 alphanumeric
characters.
The default SSID is “motorola XXX”, where XXX are the last 3
characters of your Wireless MAC address, found on the label on the
bottom of the unit. It is strongly recommended that you change this to
a unique name.
To access the screen, click Wireless > Basic.
Click Apply to save your settings or Cancel to cancel changes.