Motorola WR850G - Manual (Page 51)

CONFIGURATION SECTION 3
SECTION 3, CONFIGURATION 3-17
Field Description
Wireless MAC
Access Control
List Enables you to control which PC has access to
your wireless network based upon their MAC
address. The default is disabled. The options
are:
Enable Select to enable/disable the MAC
Access Control List (ACL). When
disabled, the MAC ACL is not
active and any wireless station is
allowed to communicate with the
wireless router.
Allow Allows only the wireless devices in
the Access Control List (ACL) to
communicate with the wireless
router.
Deny Denies wireless devices in the ACL
from communicating with the
wireless router.
To add a MAC address:
1 Check Enable.
2 Select Allow or Deny.
3 Enter a MAC address and click Add to
enter the address into the ACL.
4 To alter a MAC address, remove and
replace with the updated address.
5 After entering the MAC address(es), click
Apply to save.
To delete a MAC address:
1 Click into the MAC address you wish to
delete. Once activated, the field will change
color.
2 Click Remove to clear the address.
3 Click Apply to save.