Motorola WR850G - Manual (Page 73)

CONFIGURATION SECTION 3
SECTION 3, CONFIGURATION 3-39
Field Description
Login User ID Changes the User ID used for logging into
the router’s web-based utility. It cannot be
longer than 63 bytes. A blank user name is
not allowed. The default is “admin”.
Login Password Use this option to change the Password,
used to log into the router’s web based utility.
It cannot be longer than 63 bytes. A blank
password is not allowed. The default is
“motorola”.
Login Password
Confirm Re-enter the same Login Password.
WAN Web Login This enables you to log into the router from
the Internet.
Click to enable. The default is disabled.
WAN Web Login
Port Enables you to specify different ports on the
router to allow remote login. The default is
8080.
Login Idle Time The amount of idle time (no actions occur)
that elapses before the router automatically
logs off the user. The default is 10 minutes.
WAN Ping
Response Enables a remote user to ping the router.
Select to enable WAN Ping response. The
default is disabled.
Control Panel - Firmware Update
This screen enables you to update the firmware (router’s hardware
control mechanism). Listed on this screen is the current version of
the Model Number, Serial Number, and Firmware Number; enabling
you to verify that you are running the most current version.
Access this website www.motorola.com/broadband/networking to check
for a firmware update.