Motorola WR850G - Manual (Page 70)

SECTION 3 CONFIGURATION
3-36 SECTION 3, CONFIGURATION
To add a Virtual Server entry:
1 Virtual Server Name: Enter the name of the server. There is a
limit of 32 characters for the name. Click to enable if you wish it to
become active. Otherwise, you can save the information and
enable it at later date. To enable at a later date, select the entry
and then check enable.
2 Incoming Protocol: From the drop down box, select from TCP,
UDP, or BOTH.
3 Incoming Port: Enter the port value (0 to 65535).
4 Forwarding IP: Enter the IP Address of the server to which you
will forward.
5 Forwarding Port: Enter the port value (0 to 65535).
6 Schedule Filter: This is an optional feature. Click to enable.
Select the time for the forwarding service to be active.
To update or remove an entry, select it and then click Edit or
Remove to perform the action.
Networking - Firewall
This security device shields your network from the Internet. A firewall,
working closely with a router, examines each network packet to
determine whether to forward it toward its destination. The router
allows further customization of this packet sniffing by allowing you to
modify how and what can or cannot enter the router.
Additionally, the position of the rule within the table determines the
priority of the rule. For example, the first rule in the table applies, then
the second, etc. If the first rule deletes a ‘bad’ packet of information,
then the remaining rules are not invoked.
Multicast Pass-through is typically used for work-related activities,
such as video conferencing access.
To access the screen, click Networking > Firewall. Click Apply to
save your settings or Cancel to cancel changes.