Microtek MHP1-HD - Manual (Page 20)

20
Connec ting to a DVD Player
Connect a DVD player to the PDP to view DVD discs. If you have a DVD recorder, you can record a TV
channel you are watching, or record from one channel while watching another. You can also connect the
TV cable to the DVD and use the DVD connection to view TV programming.
To connect a DVD player to the PDP:
Connect the audio and video cables from the DVD player to the PDP, using one of the connections
below.
A. Connect the Standard composite (AV) cable video jack to the Video 1 or Video 2 connectors on the
PDP. Connect the audio jacks to the Audio R/L connectors. Standard composite (AV) is color
coded. Video = yellow, Audio Left = white, and Audio Right = red.
B. Connect the S-Video cable to the S-Video 1 or S-Video 2 on the PDP. S-Video cable does not
include audio. The audio cable (L/R) should be separately connected between the audio connectors
on the DVD player and the PDP.
C. Connect the YCbCr (component video) cable to the YCbCr input on the PDP. The YCbCr cable is
color coded green, red, and blue. YCbCr cable does not include audio. The audio cable (L/R) should
be separately connected between the audio connectors on the DVD player and the PDP.
To watch DVD programs:
1. Turn on the PDP.
2. Turn on your DVD player, then inset a DVD into the DVD player.
3. Press the TV/VIDEO button on the remote control or the SOURCE button on the PDP unit to view
and set input sources. Select Video 1, Video 2, S-Video 1, S-Video 2, or YCbCr, depending on the
connection you have made between the DVD player and the PDP.
4. Press the PLAY button to watch the DVD program.
A B
C